By Lilly 1 January, 2010
70cm MMDVM/FM Repeater
The club has a 70cm repeater at the clubrooms. We have been experimenting with different equipment over the last few months, and Lilly ZL1LLY is currently modifying her MMDVM repeater to support both DMR and analogue modes, stand by for more on this.
The repeater is currently operating in analogue, are requires a 123Hz tone to access. The repeater transmits on 438.575MHz, the input is 433.575MHz.
Below is the historical information with regard to how it was operation prior to the current change
Our club hosts a MMDVM repeater, operating on them 70cm band. Access it on 435.575 MHz.
Joining instructions
The club hosts a 70cm DMR repeater. Here are the the instructions for accessing talkgroups on this repeater.
Note: 8575 has a static talkgroup of 5301 on timeslot 1
Please see what prefix your desired network needs.
Brandmeister - No prefix - Skip step 2
FreeDMR New Zealand - A prefix of 8
XLX299 - Skip step 2 and just enter 8000009 as the talkgroup
Join the prefix to the desired talkgroup
First type the talkgroup into your programming software eg 91
Then enter the prefix infront of the talk group eg 891
Finally pad the talk group number out so it has a total of 7 numbers with zeros eg 8000091
Set the correct timeslot - This is always be timeslot 2 unless its the static talkgroup 5301 which is on timeslot 1
Finally set the colour code to 1